The same basic rules apply to all types of rollers. You want to take a section of hair slightly smaller in length and width than the size of the roller you choose. This is probably the most common error in setting rollers. If your sections are too big you won’t get a consistent curl. Also depending on the method the hair might not get enough heat or won’t dry well. Also if you remove the rollers too soon and the curl is not completely dry or not completely cool. The set will then fall out. Another thing to be very aware of is the ends of the hair. If the ends aren’t wrapped around the roller they won’t curl and will look sloppy and bent. I recommend using a setting lotion when setting your hair wet. It adds a slight tackiness to the hair that helps setting easier. Don’t worry. It will still dry soft.
Since they are my favorite let’s start with sponge rollers. Start with significantly wet hair. Apply your setting lotion and comb through. Start at the top take a section slightly smaller in width and length that the roller size you choose.
Make sure the hair is combed and elevated the section. Smooth the ends of the hair over the rollers.
The ends are very important. Make sure the are tucked in. Start rolling the roller down with enough tension to keep the hair wrapping smoothly over the roller.
When you get to the base turn the clip so you can swing the arm over the top of the roller and snap shut.
Remember with sponge rollers to control your tension. If the tension is too tight it will squeeze the roller and your curl will be smaller than you want.
The method with vented rollers is pretty much the same. The section should be smaller in width and length than the roller.
Elevate the section and smooth ends over the roller.
Make sure the ends stay on the roller and keep tension and you roll the roller down to the root.
Secure the roller with a roller clip.
Now onto hot rollers. The hair must be completely dry for hot rollers to work. Same as before the section need to be slightly smaller than the roller.
Elevate section and smooth ends over roller.
Make sure ends stay tucked and roll the roller down to the base while keeping tension on the section.
Clip section secure at the root.
I recommend misting the whole head with a light hair spray and letting the hot rollers cool completely (10-15 minutes at least) before removing.
Remember that these techniques are not the easiest thing to master so be patient and practice. The more to do it the better you will get. Mind the ends and keep the tension and you’ll have beautiful and bouncy curls.